Advertisement
Felkoder i kontrollpanel
Frekvensomriktare: Felkod 0 - 14
Felkod: Visas i display:
No fault
0
1
[Control EEprom]
2
(EEF1)
[Incorrect config]
3
(CFF)
[Invalid config]
4
(CFI)
[Modbus com.]
5
(SLF1)
[internal com. link]
6
(ILF)
[Com. network]
7
(CnF)
8
[External flt-LI/Bit]
(EPF1)
9
[Overcurrent]
(OCF)
[Precharge]
10
(CrF1)
[Speed fdback loss]
11
(SPF)
[Load slipping]
12
(AnF)
[AI2 4-20 mA loss]
13
(LFF2)
[PTC1 probe]
14
(PtF1)
Förklaring:
Reserved
Internal memory fault, control card.
Option card changed or removed. Control card replaced by a control card configured on a
drive with a different rating. The current configuration is inconsistent.
Invalid configuration. The configuration loaded in the drive via the bus or communication
network is inconsistent.
Interruption in communication on the Modbus bus.
Communication fault between option card and drive.
Communication fault on communication card.
Fault triggered by an external device, depending on user.
Parameters in the [SETTINGS] (SEt-) and [1.4 MOTOR CONTROL] (drC-) menus are not
correct. Inertia or load too high. Mechanical locking.
Pre-charge relay control fault or charging resistor damaged.
Encoder feedback signal missing.
The encoder speed feedback does not match the reference.
Loss of the 4-20 mA reference on analog input AI2.
PTC1 probes open or short-circuited.
48
Advertisement
Chapters
