1. Input / Output Overview
1.1. For Non-Military Connectors
The default output signal is VGA for the main display and S-Video for PIP display. The LCD
output can be configured to use any of the available input formats (VGA, DVI, S-Video, and
Composite).
1.2. Typical Type
Power cable connection:
Connect the power cord to the AC outlet, and connect the power to the monitor through the AC/DC
adapter.
VGA cable connection:
Plug 15-pin VGA signal cable to the VGA connector in the rear of PC system, and plug the other end
to the monitor. Secure cable connectors with screws.
DVI cable connection:
Plug DVI signal cable to the DVI connector in the rear of PC system, and plug the other end to the
monitor. Secure cable connectors with screws.
5