Rear Brake Wear Inspection - Triumph Street Triple R Owner's Handbook Manual

MAINTENANCE
158

Rear Brake Wear Inspection

If installing new proprietary brand
brake pads, check that the brake
backing plate of the brake pad is the
specified thickness shown in the table.
Installing brake pads with the brake
backing plate less than the specified
thickness may result in brake failure
due to the possible loss of the brake
pad as it wears.
1
1. Carrier plate
2. Brake pad lining
Warning
2
Brake pads supplied
will have the carrier plate at the
recommended thickness. Always have
replacement brake pads supplied and
installed by your Triumph dealer.
If the lining thickness of any brake pad
is less than that specified in the table,
replace all the brake pads on the wheel.
Carrier Plate Minimum
Thickness
Minimum Brake Pad
Lining Thickness
Minimum Service
Thickness
(Brake Pad Lining and
Carrier Plate)
by Triumph
All Models
0.16 in (4.0 mm)
0.06 in (1.5 mm)
0.22 in (5.5 mm)