Rear Brake Wear Inspection - Triumph Street Triple S 660 cc Owner's Handbook Manual

Rear Brake Wear Inspection

Warning
If fitting new proprietary brand brake
pads, check that the carrier plate
of the brake pad is the specified
thickness shown in the table.
Fitting brake pads with the carrier
plate less than the specified thickness
may result in brake failure due to the
possible loss of the brake pad as it
wears.
1
1. Carrier plate
2. Brake pad lining
Brake pads supplied
will have the carrier plate at the
recommended thickness. Always have
replacement brake pads supplied and
fitted by your Triumph dealer.
If the lining thickness of any brake pad
is less than that specified in the table,
replace all the brake pads on the wheel.
2
by Triumph
Carrier Plate Minimum
Thickness
Minimum Brake Pad
Lining Thickness
Minimum Service
Thickness
(Brake Pad Lining and
Carrier Plate)
Maintenance
All Models
3.0 mm
1.5 mm
4.5 mm
155