Rear Brake Wear Inspection - Triumph Street Triple S Owner's Handbook Manual

Rear Brake Wear Inspection

Warning
If fitting new proprietary brand brake
pads, check that the carrier plate of
the brake pad
thickness shown in the table.
Fitting brake pads with the carrier
plate less than the specified thickness
may result in brake failure due to the
possible loss of the brake pad as it
wears.
1
1. Carrier plate
2. Brake pad lining
Brake pads supplied by Triumph will
have the carrier
recommended thickness. Always have
replacement brake pads supplied and
fitted by your Triumph dealer.
is the specified
2
plate at the
MAINTENANCE
If the lining thickness of any brake pad
is less than that specified in the table,
replace all the brake pads on the wheel.
Carrier Plate Minimum
Thickness
Minimum Brake Pad Lining
Thickness
Minimum Service Thickness
(Brake Pad Lining and Carrier
Plate)
161
All Models
3.0 mm
1.5 mm
4.5 mm