EDID
Input port:1~8 Input Port
Source:Choose CUSTOM to custom EDID, Choose RESET to reset EDID
Save Preset
After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select
<Save>.
Digital buttons 0-9 will be always on or flashing. An always-on button indicates that no preset has not
been saved at this position; A flashing button indicates that certain preset has been saved at this
position already.
Users can turn the rotary knob to select Preset1-Preset16 or use the number button 1, 2, 3, 4, 5, 6, 7, 8,
9, 0 to select Preset1-Preset10. Select the position that will save, push the knob to confirm.
Saving preset in the button with flashing light will overwrite the saved parameters before.
Load Preset
After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select
<Load>.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
Input port
Source
Save
->Preset 5
Button is on can be saved
Button flashes will be overwrite
Load
->Preset 5
Button on is ready for recall
flashes is current scene
support@rgblink.com
3 HDMI 2.0
CUSTOM
|
www.rgblink.com
12 / 14