Save Preset - RGBlink Q16pro Gen2 1U User Manual

Source 1/Source 2: with HDMI 2.0, DP 1.2 input source available. The number indicates the position of this
interface on the input module.
Rotate the knob to "Save" and push the knob to save above settings.
EDID
Input port: 1~8 input port
Source: CUSTOM or RESET optional
Choose CUSTOM to custom EDID and the LCD panel displays the interface below.
The 0~9 numeric keys will light up at the same time. Use the numeric keys to enter the width, height and frame
rate one by one and then push the knob to confirm.
Choose RESET to reset EDID and the LCD panel displays the interface below after successful setting.

3.3.4 Save Preset

After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select <Save>.
Presentation
Split
Advanced
Save
Load
RGBlink provides 16 positions for saving or recording parameters.
Enter Save interface, the SAVE button light is on, which indicates the SAVE function is enabled.
Digital buttons 0-9 will be always on or flashing. An always-on button indicates that no preset has not been saved
at this position; A flashing button indicates that certain preset has been saved at this position already.
Q16pro Gen2 1U
Input port 3 HDMI 2.0
Source CUSTOM
Custom EDID
* Enter value
Copy EDID success
Please reset layer
>> Save
>> -＞Preset 5
>>
>> Button is on can be saved
>> Button flashes will be overwrite
User Manual
16