Save The Parameter - RGBlink VENUS X1 Quick Start Manual

Save the setting and restart the router, then user can directly control on VENUS X1 via windows control
software.

Save the Parameter

VENUS X1 provides 36 save preferences, operations are as follows.
1. Push the [SAVE/1] button, the button light is on, and enable the SAVE function.
2. Turn the knob, and choose the position that will save, push the knob to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means SAVE1~10, user can push any button
on to save. For example, save to SAVE 2, push button 2, the OLED panel will show as follows after
saving.
4. Push the [SAVE/1] button again, the button light is off, and disable the SAVE function.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
SAVE TO
—>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
—>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite
29
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn