Table of Contents
Advertisement
6. System Setup and Operation
How to Save the Parameter
How to Save the Parameter
1. Push the [SAVE/PIP1] button, the button light is on, and enable the
SAVE function.
2. Turn the knob, and choose the position that will save, push the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1~10, user can push
any button on to save. For example, save to SAVE 2, push button 2, the
OLED panel will show as follows after saving.
User can also push the [MENU/EFFECT] button to enter to the menu
items, turn the knob to choose <SAVE SETUP>, and choose ―SAVE TO‖
to save the parameter.
4. Again push the [SAVE/PIP1] button, the button light is off, and disable
the SAVE function.
VSP 9516S
SAVE TO
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite
User Manual
112
Advertisement
Table of Contents
