Parameter Settings; Umplatform Interface Is Introduced - RGBlink IC2+ User Manual

4.1 Parameter Settings

4.1.1 UMPlatform Interface is Introduced

(1) Current UMPlatform software version
(2) Node type options: The software distinguishes input, output and parameter
modification of other nodes
(3) Scan：Click and broadcast to query data. Nodes that receive broadcast
information will return node information.
(4) Restart：Restart the selected device. You need to restart the system after some
parameters are modified or upgraded.
(5) Select All：Select all input nodes or output nodes.
(6) Reverse select：The selected node is unselected.
(7) Scan Setting：Select the local network IP address and set the scanning mode.
Parameters can be modified on the same network segment. The purpose of
scanning across network segments is to discover devices. After the destination IP
address is detected, set the local network IP address to be on the same network
segment as the destination IP address so that parameters can be modified.
(8) Reset：Restore some node parameters, except network Settings, LCD Settings
and other parameters.
9