Error And Warning Messages In Pfea113; Error Messages; Warning Messages - ABB PFEA 113 User Manual

6.6 Error and Warning Messages in PFEA113

6.6.1 Error Messages

6.6.2 Warning Messages

3BSE029382R0101 Rev C
An ERROR is something that causes the electronics to function incorrectly.
A WARNING is something that might affect the accuracy of the measurement.
When a warning or an error occurs, a warning or an error message is displayed on the
Operator Panel and the "Status" indication turns from green to red.
When is pressed the message disappears from the display.
If the problem that activated the warning or error message has disappeared the
"Status" indication turns to green.
If the error or warning remains the "Status" indication is red. Use the
operator menu, where you can read the error or warning message.
The following errors can be detected:
• Flash (memory) error
• EEPROM (memory) error
• Supply error
• Load cell excitation error
See Section 6.8 Warnings and Errors Detected by the Tension
The following warnings can be detected:
• Profibus communication problem
• Synchronization problem
See Section 6.8 Warnings and Errors Detected by the Tension
Tension Electronics PFEA113, User Manual
Section 6.6 Error and Warning Messages in PFEA113
to step to the last
Electronics.
Electronics.
6-3