Table of Contents
Advertisement
13
SetTensionAt10V
[XXXXXX] N
SetTensionAt20mA
[XXXXXX] N
14
FilterSettings
[250 ms 1.5Hz]
To
15
Operator
Menu
Finished
PressOk
3BSE029382R0101 Rev C
Tension Electronics PFEA113, User Manual
Section 3.8.2 Performing Fast Setup using Wrap Gain
Voltage selected:
Enter the tension value corresponding to 10 V.
or
Current selected:
Enter the tension value corresponding to 20 mA.
Confirm with
.
Select filter setting (5, 15, 30, 75, 250, 750 or 1500 ms) from
the list with
or
. Confirm with
FastSetUp of a system with one roll is now completed.
Press
to finish the fast setup and go to the operator
menu.
Proceed with the FastSetUp for Roll 2. In step 4, select the
load cells (2, SingleSideC or SingleSideD) that support
Roll 2 from the list with
.
or
. Confirm with
.
3-9
Hide quick links:
Advertisement
Table of Contents
