Power Supply Unit Sd83X - ABB PFEA 113 User Manual

2.13.3 Power Supply Unit SD83x

3BSE029382R0101 Rev C
A2 (-)
A1 (+)
Figure 2-17. Circuit diagram PXKB 201
If no 24 V is available, the power supply units SD 831, SD 832 and SD 833 can be used as
power supplies for the IP 20-versions.
The power supply unit is intended to be installed on a DIN-rail.
The main supply voltage for all the three power supply units are:
• 115 V AC (90 - 132 V), 100 V -10% to 120 V + 10%
• 230 V AC (180 - 264 V), 200 V -10% to 240 V + 10%
Table 2-5. Number of PFEA113 that can be supplied
Power Supply Unit
SD 831 (3 A)
SD 832 (5 A)
SD 833 (10 A)
Tension Electronics PFEA113, User Manual
Section 2.13.3 Power Supply Unit SD83x
PFEA113
3 Supply of digital outputs not included
6 Supply of digital outputs not included
12 Supply of digital outputs not included
11
14
12
Remarks
2-15