ABB PFEA 113 User Manual page 45

3BSE029382R0101 Rev C
Select Voltage, Current or Profibus only
AO 1 - AO 6
Connect AO1- AO6 to tension signals or a
combination of tension signals
Set filter settings
Set high tension value and high output voltage
Set low tension value and low output voltage
Set high and low output voltage limit
Set indication outputs for Level detectors 1-4
DO 1 - DO 4
Set "Status OK" to indicate that the system is
running normally
Used to connect PFEA113 units to one another
AI 1 - AI 2
when 2 or 3 are used.
- Set High Tension (N, kN, kg, lbs, N/m, kN/m,
kg/m, pli)
- High Input V
Can be used for:
DI
- Zero set or
- Gain scheduling
Set Profibus address and measuring range
Miscellaneous
Menu
Reset all values to factory default
Read service information
ServiceMenu
Reset maximum load for load cell A
Reset maximum load for load cell B
Reset maximum load for load cell C
Reset maximum load for load cell D
Tension Electronics PFEA113, User Manual
Section 3.11.1 Overview
3.12.7
3.12.8
3.12.9
3.12.10
3.12.11
3.12.12
3-13