Scaling Of Profibus Measuring Values - ABB PFEA 113 User Manual

2. Profibus Scaling: Segmented roll selected in SystemDefinition
From DI
Miscellaneous
Menu
ServiceMenu
Profibus On/Off
Profibus Address
Measuring Range

3.13.5.2 Scaling of Profibus Measuring Values

3BSE029382R0101 Rev C
Profibus On/Off
ZZ
ProfibusAddress
ZZZ
To
(Only shown if
Profibus is On)
MeasuringRange
SegmentedRoll
(Only shown if
Profibus is On)
SetFactory
Default
Figure 3-26. Profibus Scaling, Segmented Roll
Table 3-5. Profibus parameters
Parameter
The Profibus values can be scaled in two ways:
• Default Scaling – scaling that only depends on load cell nominal load.
• User defined Scaling – the scaling of the Profibus values can be set by the user.
Section 3.13.5 Handling of Measurement Data through Profibus
Profibus On/Off
[ZZ]
ProfibusAddress
[ZZZ]
MeasuringRange
XXX.XXX N
LoadDivision
XXX.XXX N
Description
The Profibus can be enabled and disabled.
If the Profibus is enabled, the Profibus address
must be set in the range 000 - 125.
If the Profibus is enabled, the Profibus
Measuring Range and load division can be set
for Roll1 and Roll2 separately.
Tension Electronics PFEA113, User Manual
AreYouSure
MeasuringRange
[XXX.XXX] N
ActionDone
(shown for 1 s.)
3-43