ABB PFEA 113 User Manual page 217

Bearing housing
Lagerhus
Load cell
Lastcell
Fundament
Foundation
3BSE029382R0101 Rev C
Table F-1. MoS lubricated , galvanized Screws According to ISO 898/1
2
Strength class
(1)
8.8 (12.9)
Table F-2. Waxed Screws of Stainless Steel According to ISO 3506
Strength class
(1)
A2-80
(1) Strength class 12.9 is recommended for 50 kN load cells, when large
overloads are expected, especially if the fixing screws are subjected to
tension.
Roll
Rulle
Pressductor
System
Figure F-3. Typical Installation
Tension Electronics PFEA113, User Manual
Dimension Tightening torque
M16 170 (286) Nm
Dimension Tightening torque
M16
Upper adapter plate
Övre mellanläggsplatta
Lower adapter plate
Undre mellanläggsplatta
Section F.7.2 Mounting
187 Nm
F-9