Connecting Analog Inputs (Ai1-Ai2); Connecting Digital Outputs (Do1-Do4); Connecting The Digital Input (Di) - ABB PFEA 113 User Manual

2.10 Connecting Analog Inputs (AI1-AI2)

2.11 Connecting Digital Outputs (DO1-DO4)

2.12 Connecting the Digital Input (DI)

3BSE029382R0101 Rev C
The two analog inputs, AI1 and AI2, are differential inputs with a signal range of 0-10 V.
Figure 2-13. Connecting Analog Inputs
The four digital outputs, DO1-DO4, are insulated as a group. See
The digital outputs are current driving and can be supplied from an external 24 V DC or from
the 24 V DC supply used for PFEA113.
The current at state "1" is maximum 0.1 A per output.
PFEA113
Figure 2-14. Connecting Digital Outputs
The digital input is a differential input with the following data:
Passive: -36 V to +5 V
Active: >16 V (maximum +36 V)
Figure 2-15. Connecting the Digital Input
Tension Electronics PFEA113, User Manual
Section 2.10 Connecting Analog Inputs (AI1-AI2)
PFEA113
PFEA113
Figure 2-14.
2-13