Download Print this page
Renesas R0E5563NEDMB00 User Manual
Renesas R0E5563NEDMB00 User Manual

Renesas R0E5563NEDMB00 User Manual

Debugging mcu board for 144-pin 0.5mm-pitch lqfp of the rx63n and rx631 groups

Advertisement

Quick Links

R0E5563NEDMB00
Debugging MCU Board for 144-pin 0.5mm-pitch LQFP
of the RX63N and RX631 Groups
1. Overview
The debugging MCU board R0E5563NEDMB00 (hereafter referred to as "this product") is for MCUs of the RX63N
and RX631 groups in the PLQP0144KA-A package.
With the E20 emulator, the emulator occupies some user port pins for controlling the emulator and output of trace
information. These user port pins must be connected with a 38-pin connector installed on the user system.
With this product, however, all user port pins are available for the user system. In addition, you do not need to install a
38-pin connector on the user system.
Figure 1 shows the configuration of a system that includes this product and the E20.
Be sure to read section 7, Notes on Usage, before using this product.
USB interface cable
Host computer
Figure 1
System Configuration
2. Package Components
The package of this product consists of the following items. Check that you have all of the components when you
unpack the box.
Table 1
Package Components
Component
Debugging MCU board common part
(R0E5563NEVKZ00)
Converter board (R0E55630EPFK00)
YQPACK144SD
(from Tokyo Eletech Corporation)
NQPACK144SD-ND
(from Tokyo Eletech Corporation)
YQ-GUIDE-S1
(from Tokyo Eletech Corporation)
Cautions in handling
User's Manual (English and Japanese) 1 for each This manual (English)
Note: NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET,
CSPLUG/W, and LSPACK are trademarks of Tokyo Eletech Corporation.
R20UT2220EJ0200 Rev.2.00
Mar 05, 2014
E20 emulator
38-pin connector
User system
Quantity Remarks
1
For the dimensions, refer to section 6, Dimensions of This Product.
1
For the dimensions, refer to section 6, Dimensions of This Product.
1
Connector to be placed between this product and the NQPACK.
1
IC socket for mounting on the user system
4
Screws for fastening the YQPACK to the NQPACK.
1
Cautions when handling the products of Tokyo Eletech Corporation
NQPACK
(provided with this product)
User's Manual
R20UT2220EJ0200
Rev.2.00
Mar 05, 2014
Debugging MCU board
(this product)
YQPACK
(provided with this
product)
Page 1 of 8

Advertisement

loading

Summary of Contents for Renesas R0E5563NEDMB00

  • Page 1 RX63N and RX631 Groups 1. Overview The debugging MCU board R0E5563NEDMB00 (hereafter referred to as “this product”) is for MCUs of the RX63N and RX631 groups in the PLQP0144KA-A package. With the E20 emulator, the emulator occupies some user port pins for controlling the emulator and output of trace information.
  • Page 2 (including all accessories) is not intended for household use. After use the equipment cannot be disposed of as household waste, and the WEEE must be treated, recycled and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can take back end of life equipment, register for this service at “http://www.renesas.eu/weee”.
  • Page 3: Specification

    R0E5563NEDMB00 User's Manual 3. Specifications Table 2 shows the functional specifications of this product. Table 2 Specifications of This Product Item No. Item Specification • RX63N- and RX631-group MCUs in PLQP0144KA-A packages MCU for use • R5F563NEDDFC The MCU type name...
  • Page 4 5. Mount an MCU with on-chip flash memory and the HQPACK144SD (not included) in order on the NQPACK144SD-ND on the user system. Before using the R0E5563NEDMB00, be sure to read section 7, Notes on Usage. WARNING Warnings to Be Taken for Connection: •...
  • Page 5 R0E5563NEDMB00 User's Manual 6. Dimensions of This Product Figures 4 shows the dimensions and reference foot pattern of this product (R0E5563NEDMB00). 50.00 VREFH0 AVCC0 VREFH VBATT VCC_USB POWER 10.50 10.50 25.00 0.50x35=17.50 0.25 0.50 19.00 23.00 Unit[mm] Figure 4 Reference Foot Pattern and Dimensions of This Product (R0E5563NEDMB00) R20UT2220EJ0200 Rev.2.00...
  • Page 6: Notes On Usage

    • The output of the reset circuit of the user system must be open collector. Note on the Flash Programming Software Products (Flash Development Toolkit, Renesas Flash Programmer, etc.): • Do not use the flash programming software products when using this product.
  • Page 7: Warranty

    Other pieces of equipment connected to the product d) Fire, earthquakes, thunderbolts, floods, or other natural disasters or abnormal voltages, etc. e) Modifications, repairs, adjustments, or other acts made to the product by other than Renesas Electronics Corporation. In the above cases, contact your local distributor.
  • Page 8 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.