Management - 3Com 4007 Release Note

50 C 5: R
HAPTER ELEASE

Management

I L 2 S
SSUES FOR AYER WITCHING
The following request now returns correct and complete values for the
9-port 1000BASE-SX Gigabit Ethernet Layer 2 Switching Module:
The value of entPhysicalClass that is returned for the instance of
the module itself (entPhysicalClass.4) now returns 9, which
represents the value for the module.
The module agent now returns the ipNetToMediaPhysAddress MIB-II
to the ipNetToMediaTable.
The object cb9000BackplaneConnectIfIndex now lists backplane port
numbers in increasing order for the 9-port 1000BASE-SX Gigabit
Ethernet Layer 2 Switching Module.
The object a3ComSysBridgePortAddressStaticPort now returns one of
the following values:
The local bridge port index when a static address is configured for
the port
The value 0 when a dynamic address is configured for the port
If there is a trunk on the switching module, an SNMP getnext request
on the MIB object a3ComTrunkTcmpMacState now correctly returns
the correct value. For example, a Gigabit Ethernet switching module
that has two trunks:
Ports 1 and 9 — MIB objects a3ComTrunkTcmpMacState.14.1 and
3ComTrunkTcmpMacState.14.9
Ports 4 and 5 — MIB objects a3ComTrunkTcmpMacState.15.4 and
3ComTrunkTcmpMacState.15.5
A getnext request on a3ComTrunkTcmpMacState.14.9 returns
a3ComTrunkTcmpMacState.15.4
A getnext request on a3ComTrunkTcmpMacState.15.4 returns the
next MIB object
The objects in the a3ComTrunkMacTable are now accessible via SNMP.
SNMP now returns an error if the object
a3ComSysEthernetPortRequestedPortMode is set to values out of
range for the port. (30022)
An SNMP getnext ifIndex request with a very large instance ID now
returns the correct value ifDescr.1, instead of the incorrect value
ifIndex.1.
An SNMP get request on entLPPhysicalIndex is now implemented.
M
ODULES