Important Notes - 3Com 4007 Release Note

If you are using the Enterprise VLAN Manager and Address Tracker
applications, do one of the following:
Under the /usr/3Com/diagnostics directory run: ./tncs_diagnostics.sh
1 Choose #1 to administer TNCS servers
2 Choose #1 to start/stop specific TNCS servers
3 Choose each of the application servers and follow the directions on the
screen to finish the task

Important Notes

Transcend Central standalone installation will start AddressTracker and
Enterprise VLAN Manager daemons—be aware of this and shut them
down if needed.
VLAN Manager daemons and HPOV NNM: The VLAN poller daemons
and
medp pdp/java
NNM; therefore they can be started/stopped by the HPOV NNM
commands – ovstart/ovstop. If you reboot your workstation for any
reason or start NNM with the ovstart command, the Enterprise VLAN
Manager background daemons are invoked automatically. Please use the
tncs_diagnostics.sh
the Enterprise VLAN Manager daemons once they are started.
Transcend daemons and restarting your workstation: Transcend
daemons are started automatically if your workstation is rebooted for any
reason. Please be aware of this if you plan to shutdown and restart your
UNIX workstation.
Be aware of the polling cycles you set for VLAN Manager, Address
Tracker, and other Transcend applications that do SNMP polling. Setting
shorter polling intervals for these applications can increase the chance of
instability in your network. By staggering the polling intervals for all of
Transcend applications that use polling and have customizable polling
rates, you can help minimize SNMP traffic. Also, planning your polling
cycles during off-peak hours can help alleviate extra traffic on your
network as well.
Corrected Problems in Release 3.0.5
are background daemons that are integrated with
script after you restart NNM so that you can stop
39