Administering Uni Management Entities; Displaying Ume Information - 3Com CoreBuilder 2500 Software Installation And Release Notes

Administering UNI
Management
Entities
Displaying UME
Information
A User-to-Network Interface (UNI) Management Entity (UME) implements
the management interface to the ATM network. Each ATM port has one
UME, which manages the network prefix and address tables and provides
access to the Interim Local Management Interface (ILMI) MIB.
Each CoreBuilder 2500 UME registers one address for LAN Emulation and
one address for Classical IP over ATM with the switch port to which it is
attached.
You can display information about each UME and configure its attributes.
When you display UME information for an ATM port, you display values
for the connection state, the VPI (virtual path identifier), the VCI (virtual
channel identifier), and other attributes.
To display UME information:
1 From the top level of the Administration Console, enter:
atm ume display
You are prompted to select an ATM port.
2 Enter the ATM port for which you want to display the UME information.
The UME information is displayed.
Sample display:
reqState
connected
vpi
0
connCount
2
dropRxPdus
0

Administering UNI Management Entities

state
disconnected
reqVci
16
discCount
2
txPdus
209
49
reqVpi
0
vci
16
rxPdus
232