Operating Considerations For Release; Diagnostic Events; Chassis Reset; Software Transfers - 3Com 4007 Release Note

Operating
Considerations for
Release 3.0.5

Diagnostic events

Chassis Reset

Software Transfers

The EME no longer redirects broadcast frames to its default gateway.
(27142)
The EME password no longer reverts back to the default password
after a reset of the switch fabric module and a switchover to the
redundant EME. (29077)
This section describes the operating considerations that exist for an EME
that is operating with software Release 3.0.5.
Diagnostic events that are logged to the Enterprise Management
Engine (EME) show the slot number for the module at the time of
failure. If you move the module to a different slot before these events
get logged, the diagnostic events correspond to the previous slot
number.
The Chassis Reset button functions only on the management module
with the active EMC. The active EMC is indicated by the module with
the illuminated Active LED.
Do not attempt to perform any management tasks while you are
downloading software.
While you are downloading or uploading a file, do not close the
console window that you used to execute the command. If you use a
script to execute the command, do not halt the script.
If you are planning to transfer several software load image files
consecutively with the
space is available in the EME file system before you begin each of the
file transfers.
To determine whether there is adequate file space, enter the
command.
file
If the value in the Number of bytes available field is less than the size
of the file to be transferred, do not begin the file transfer. Use the
command to delete unneeded files until the value in the
clear file
number of bytes available field is adequate. If you attempt the transfer
without adequate space available, the transfer will fail.

Operating Considerations for Release 3.0.5

command, ensure that adequate
download
29
show