Installing Emc Boot Software; Installing Emc Operational Software - 3Com 4007 Release Note

108 C 8: S
HAPTER OFTWARE
Installing EMC Boot
Software
Installing EMC
Operational Software
I
NSTALLATION
To upgrade a module's EMC boot software to version 2.1, enter the
following commands and information:
When downloading this software to either a Master/Primary module or a
Slave/Secondary module, use this command:
CB9000> download module <slot.subslot> boot_image <server
address> emc20100.bt
Where
<slot.subslot>
IP address of the server where the software image resides.
The system indicates that downloading software will cause the module to
reset and asks if you want to continue. Enter
To upgrade a module's EMC operational software to version 3.0.0, enter
the following commands and information:
When downloading this software to either a Master/Primary module or a
Slave/Secondary module, use this command:
CB9000> download module <slot.subslot> oper_image <server
address> emc30000.op
Where
<slot.subslot>
IP address of the server where the software image resides.
The system indicates that downloading software will cause the module to
reset and asks if you want to continue. Enter
is either 8.1 or 9.1 and
is either 8.1 or 9.1 and
<server address>
(yes).
y
<server address>
(yes).
y
is the
is the