What ships with the Seeker X?
When you unpack the Seeker X, the following items are included as standard.
Seeker X Leakage Detector
y
Battery (installed in the unit)
y
AC to DC Power Adapter & Battery Charger with USB Charge/Data Cable
y
Quick Start Guide (a multi-fold guide that fits easily in the carrying case)
y
Safety information sheet
y
Optional kits
Walk out – Adds the directional handheld antennas (WFS-1, WFS-2), near field probe
y
(NFP-1), car charger, and carrying case
Drive out – Adds the Mobile Mount, diplexer (DPF-1), and vehicle antennas (AVM-3,
y
WVM-2)
Mapping – Adds a Seeker MCA III, and GPS receiver
y
Preparation for use
This section explains how to start using the Seeker X. When you unpack your instrument, do
the following:
Inspect the unit for damage. If the instrument is damaged, put it back in the box and
y
contact VIAVI customer service (see
If undamaged, save the box and packing materials in case you need to ship the
y
instrument in the future.
Remove the protective film from the LCD. This film is in place to protect the LCD during
y
shipment. Use the tab in the lower right corner to easily remove the film.
Before using the Seeker X for the first time, do the following:
Turn on the unit and verify it is operating properly by navigating through a few menus.
y
If the LO appears on the display, charge the battery.
y
NOTE:
For additonal information about Seeker X options and
services, contact your local VIAVI representative or visit
www.viavisolutions.com.
Feb 2020
"Technical Assistance" on page
Seeker X User's Guide
22137808, Rev. 001
About this Guide
11).
17