Distance Correction Adjustment - Viavi Seeker X User Manual

Distance correction adjustment

NOTE:
This feature is disabled by default at the factory. In the
Seeker Setup software, the Enable Distance Correction
checkbox must be selected and at least one distance has
been configured and enabled before this feature will work.
While testing for leaks, you may want to adjust the distance correction value to account for
differences in distance between the Seeker X and the cable plant.
Use the DISTANCE button to
display the Distance Correction
mode.
NOTE:
The display will revert to the signal level display after a
few seconds in the distance correction display (without any
action by the user).
Feb 2020
Seeker X User's Guide
22137808, Rev. 001
Chapter 2 Using Your Seeker X
45