Chapter 1 Quick Tour
A guided tour of your Mobile Mount
Front view
Antenna connection
Connects the Seeker X antenna input to
the Seeker X Mobile Mount. This bypasses
the top BNC antenna input of the Seeker
X, allowing the use of low and high-band
vehicle mounted antennas.
Spring loaded cradle
The cradle is spring loaded to ensure that
the Seeker X is held securely in the Mobile
Mount.
To place the Seeker X into the Mobile
Mount, place the bottom of the Seeker
X in the cradle and press down while
pressing the top of the Seeker X back into
the Mobile Mount to connect the Seeker
X antenna input to the Mobile Mount
antenna connection.
The spring return of the cradle will secure
the top of the Seeker X upward into the
recess in the top of the Mobile Mount.
Mobile Mount interface
When the Seeker X is in the Mobile
Mount, charges the meter and allows
communication between the Seeker MCA III
and the meter.
NOTE:
If the spring return of the Mobile Mount cradle is broken or not
working properly, contact 1-844-GO-VIAVI for repairs.
28
Seeker X User's Guide
22137808, Rev. 001
Feb 2020