Table of Contents
Advertisement
Chapter 4 Appendix
Error messages
Some errors may be corrected through a power cycle or a software update. All other errors
will require returning the device to the factory for repair.
Error messages
DB ERR
SYNC ERR
FPGA 1
FPGA 1_8
PREG 2
PREG 3_3
RF 3
RF 1_8
RF 2
RF 5
CLOC SYN
FPGA BOOT
62
Sync from MCA to the meter failed. Try again.
Sync from MCA to the meter failed. Try again.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Reboot the unit and retry. If it doesn't fix, return to the factory for
repair.
Seeker X User's Guide
22137808, Rev. 001
Descriptions
Feb 2020
Advertisement
Table of Contents
