Selecting A Distance Correction Preset - Viavi Seeker X User Manual

Chapter 2 Using Your Seeker X

Selecting a distance correction preset

The Distance Correction display is used to select the distance correction preset used by the
Seeker X. The preset distances 1–8 can be configured using StrataSync or the Seeker Setup
software.
NOTE:
For detailed instructions on how to set the distance
correction values, see the
Guide or the StrataSync User's
To select a preset distance, turn your Seeker X on and press the DISTANCE button.
When the DISTANCE button is selected, the distance preset will toggle through the
y
enabled presets 1–8, as indicated below.
The distance correction for each preset is displayed.
y
46
GPS DIST PK FREQ
NOISE
dB
μV
m
SEEKER X
Preset #1
Seeker X User's Guide
22137808, Rev. 001
Seeker Setup Software User's
Guide.
GPS DIST PK FREQ
SEEKER X
Preset #2
NOISE
dB
μV
m
Feb 2020