Checking The Battery Charging Status - Viavi Seeker X User Manual

Chapter 2 Using Your Seeker X

Checking the battery charging status

NOTE:
If the Seeker X is not completely seated in the Mobile
Mount, the charge screen will not be available.
To view the charging status of the battery, turn your Seeker X on and press the SELECT
button twice.
The Charge icon will flash to show you are in the Battery
y
Charging Status display.
The numerical display will continue to display the RF signal
y
level.
The bar graph will display the progress of the charging
y
cycle. If two or more bars are displayed, then power is
present and charging is in progress.
NOTE:
If the Seeker X is not detecting any power to the Mobile
Mount, the bar graph will not be displayed.
NOTE:
The display will revert to the signal level display after a few
seconds in the battery charging status display (without
any action by the user).
40
Seeker X User's Guide
22137808, Rev. 001
GPS DIST PK FREQ
NOISE
dB
μV
m
SEEKER X
Battery charging status
Feb 2020