Using The Display; In The Mobile Mount; Outside The Mobile Mount - Viavi Seeker X User Manual

Using the display

Your Seeker X will operate differently, depending on whether it is in the Mobile Mount or if
you are using it outside the vehicle in walkout mode.

In the Mobile Mount

In the Mobile Mount, the Seeker X automatically scans all of
the frequencies in the selected frequency plan, if available, and
shows up to two of the plan's leakage values on the screen
simultaneously.
To show the current frequency setting, press the
y
CHANGE button.
To toggle through the frequencies, press the CHANGE
y
button multiple times.
The leakage values for each frequency are then displayed in the
corresponding area of the screen.
If leaks are detected in alternate frequencies, a tone will sound
to alert you, but the level won't be shown.

Outside the Mobile Mount

When removed from the Mobile Mount, the Seeker X no longer
automatically scans through the frequency plan (and only
displays one frequency at a time, as shown here).
To show the current frequency setting, press the CHANGE
y
button. The type of antenna you need to attach is then
displayed.
To toggle through the frequencies, press the CHANGE button multiple times.
y
The leakage values for each frequency are then displayed.
GPS DIST PK
Current frequency
Feb 2020
FREQ
NOISE
dB
μV
m
SEEKER X
Attach WFS-1 antenna for
Seeker X User's Guide
22137808, Rev. 001
130–450 MHz
Chapter 2 Using Your Seeker X
GPS DIST PK FREQ
SEEKER X
Current frequencies
GPS DIST PK FREQ
SEEKER X
Current leak values
GPS DIST PK FREQ
NOISE
dB
μV
m
SEEKER X
Current leak value
NOISE
dB
μV
m
NOISE
dB
μV
m
37