Mobile Mount charging
Placing the Seeker X into the Mobile Mount will begin charging. The following conditions
apply when charging the Seeker X via the Mobile Mount:
The Mobile Mount DC power cable must be connected to the Mobile Mount and the
y
vehicle power supply before charging can begin.
When the Seeker X is off and it is placed in the Mobile Mount, the device will charge
y
and nothing will be shown on the display.
When the Seeker X is on and it is placed in the Mobile Mount, the display remains on
y
the Measurement mode screen.
Charging with the optional Seeker MCA III
When the Seeker X is used with the optional Seeker MCA III, the following charging
actions will occur.
When the Seeker X is on and charging, the display remains on the Measurement
y
mode screen.
If the Seeker X is turned off and is placed in the Mobile Mount, the Seeker X
y
automatically turns on when the vehicle is turned on.
If the Seeker X is turned on and placed in the Mobile Mount, the Seeker X
y
automatically turns off when the vehicle power has been turned off (and the
vehicle timer of the Seeker MCA III has expired).
Feb 2020
Seeker X User's Guide
22137808, Rev. 001
Chapter 1 Quick Tour
31