Seeker Mca Iii Display Screens (Optional); Gps Signal - Viavi Seeker X User Manual

Seeker MCA III display screens (optional)

GPS signal

NOTE:
When the Mobile Mount is not connected to a Seeker MCA
III, the GPS icon is not shown on the display.
When the Seeker X is placed in the Mobile Mount, the GPS icon is
used to display the status of the GPS Signal as follows:
When the GPS receiver is receiving a satellite signal, the
y
GPS icon is on.
When the GPS receiver is not receiving a satellite signal,
y
the GPS icon flashes.
NOTE:
When the GPS receiver has been off or has not been able
to receive a satellite signal, for more than five minutes,
the device will beep twice every few seconds until the
condition is corrected.
NOTE:
When the GPS receiver IS NOT receiving a satellite signal,
the MCA III will not record leakage data from the Seeker.
Feb 2020
Seeker X User's Guide
22137808, Rev. 001
Chapter 2 Using Your Seeker X
GPS DIST PK FREQ
SEEKER X
GPS signal
NOISE
dB
μV
m
51