Every 500 Hours; Checking Engine Timing Belt; Every 1000 Hours; Replacing Engine Timing Belt - Kubota RTV520 Operator's Manual

Table of Contents

Advertisement

 PERIODIC SERVICE
2. To drain the used oil, remove the drain plug and the
filling plug at the front axle case and drain the oil
completely into the oil pan.
(1) Drain plug
(2) Filling plug with dipstick
3. After draining, reinstall the drain plug.
4. Fill with the new oil up to the upper notch on the
dipstick.
(See LUBRICANTS, FUEL AND COOLANT on
page 51.)
Oil capacity
5. After filling, reinstall the filling plug.

EVERY 500 HOURS

1. Checking engine timing belt

Consult your local KUBOTA Dealer for this service.

EVERY 1000 HOURS

1. Replacing engine timing belt

Consult your local KUBOTA Dealer for this service.

2. Adjusting engine valve clearance

Consult your local KUBOTA Dealer for this service.
72
(A) Oil level is acceptable within
this range.
0.21 L (0.22 U.S.qts.)
3. Cleaning engine combustion
chamber
Consult your local KUBOTA Dealer for this service.
EVERY 1000 HOURS OR EVERY
1 YEAR
1. Replacing air cleaner primary
element and secondary element
(See Cleaning air cleaner primary element on page 62.)

2. Replacing pre cleaner element

(See Cleaning pre cleaner element on page 62.)
EVERY 2000 HOURS OR EVERY
2 YEARS
Be sure to do the following service once every 2000
hours or every 2 years whichever comes faster.
1. Flushing cooling system and
changing coolant
WARNING
To avoid serious injury or death:
• Do not remove the radiator cap while coolant
is hot. When cool, slowly rotate cap to the
first stop and allow sufficient time for excess
pressure to escape before removing the cap
completely.
Coolant capacity
1. Stop the engine and let cool down.
2. Remove the radiator maintenance cover.
EVERY 500 HOURS
2.4 L (2.5 U.S.qts.)
RTV520

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF