Changing Front Axle Case Oil; Every 500 Hours; Cleaning Engine Combustion Chamber; Every 1 Year - Kubota RTV400 Operator's Manual

60 PERIODIC SERVICE
BChanging Front Axle Case Oil
1. Park the vehicle on a firm, flat and level surface.
2. To drain the used oil, remove the drain and filling plugs
at the front axle case and drain the oil completely into
the oil pan.
3. After draining, reinstall the drain plug.
4. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
5. After filling, reinstall the filling plug.
Oil capacity
(1) Drain plug
(2) Filling plug with dipstick
0.21 L (0.22 U.S.qts.)
(A) Oil level is acceptable
within this range

EVERY 500 HOURS

BCleaning Engine Combustion Chamber
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.

EVERY 1 YEAR

BReplacing Engine Air Cleaner Element
(See "Cleaning Engine Air Cleaner Element" in "EVERY
100 HOURS" in "PERIODIC SERVICE" section.)
BReplacing CVT Air Cleaner Element
(See "Cleaning CVT Air Cleaner Element" in "EVERY 100
HOURS" in "PERIODIC SERVICE" section.)