Jack-Up Point; Front End; Rear End; Daily Check - Kubota RTV520 Operator's Manual

PERIODIC SERVICE
4. Push the safety support into the latch slot to lock
when the cargo is fully raised.
(1) Safety support
(2) Latch slot
5. To lower the cargo bed, raise the cargo bed slightly
using the handgrip.
6. Release the safety support from the latch slot by
pulling up on the middle of the support.
7. Put the safety support into the support holder.
(1) Support holder
8. Slowly lower the cargo bed onto the frame and set
the latches on both sides.

JACK-UP POINT

WARNING
To avoid serious injury, death or vehicle damage:
• Do not work under the vehicle unless it is
secured by safe stands or suitable blocking.

1. Front end

Jack up at the front bumper only.
54
(1) Front bumper
(2) Jack
(3) Wooden block

2. Rear end

Jack up the rear side using wooden block between the
jack and transmission bottom cover.
IMPORTANT :
• Do not jack it up supporting the steel plate
portion under the transmission bottom cover
directly.
(1) Transmission bottom cover
(2) Jack
(3) Wooden block

DAILY CHECK

For your own safety and maximum service life of
the vehicle, make a thorough daily inspection before
operating the vehicle to start the engine.
WARNING
To avoid serious injury or death:
• Be sure to check and service the vehicle on
a flat surface with the engine shut off and the
parking brake "ON".
JACK-UP POINT
RTV520