Changing Front Axle Case Oil; Every 500 Hours; Adjusting Engine Valve Clearance; Checking Engine Timing Belt - Kubota RTV500 Operator's Manual

66 PERIODIC SERVICE
BChanging Front Axle Case Oil
1. Park the vehicle on a firm, flat and level surface.
2. To drain the used oil, remove the drain and filling plugs
at the front axle case and drain the oil completely into
the oil pan.
3. After draining, reinstall the drain plug.
4. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS, FUEL AND COOLANT" in
"MAINTENANCE" section.)
5. After filling, reinstall the filling plug.
Oil capacity
(1) Drain plug
(2) Filling plug with dipstick
0.21 L (0.22 U.S.qts.)
(A) Oil level is acceptable
within this range

EVERY 500 HOURS

BAdjusting Engine Valve Clearance
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.
BChecking Engine Timing Belt
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.

EVERY 1000 HOURS

BReplacing Engine Timing Belt
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.

EVERY AFTER 1000 HOURS

BCleaning Engine Combustion Chamber
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.

EVERY 1 YEAR

BReplacing Air Cleaner Primary Element
and Secondary Element
(See "Cleaning Air Cleaner Primary Element" in "EVERY
100 HOURS" in "PERIODIC SERVICE" section.)
BReplacing Pre Cleaner Element
(See "Cleaning Pre Cleaner Element" in "EVERY 100
HOURS" in "PERIODIC SERVICE" section.)