Checking Radiator Hose And Clamp - Kubota RTV520 Operator's Manual

EVERY 1 YEAR
2. If the fuel line and clamps are found to be damaged
or deteriorated, replace them.
(1) Hose clamp
(2) Fuel line
(1) Fuel line
(2) Hose clamp
(3) 3 way connector

2. Checking radiator hose and clamp

1. Park the vehicle on a flat surface and raise the
cargo bed.
2. Check to see if radiator hoses are properly fixed.
3. If hose clamps are loose or water leaks, tighten
bands securely.
4. Replace hoses and tighten hose clamps securely, if
radiator hoses are swollen, hardened or cracked.
RTV520
(1) Radiator hose
(2) Clamp band
(1) Radiator hose
(2) Clamp band
(1) Radiator hose
(2) Clamp band
(3) Water return hose
(4) Alternator
Precaution at overheating
Take the following actions in the event the coolant
temperature is close to or more than the boiling point,
which is called "Overheating".
1. Stop the vehicle operation in a safe place, unload
the engine and remain at idle.
2. Don't stop the engine suddenly, but stop it after
about 5 minutes of unloaded idling.
PERIODIC SERVICE
75