Kubota RTV520 Operator's Manual page 47

CARGO BED
3. Release the latches on both sides and then raise
the cargo bed with the handgrip.
NOTE :
• When the lock is loose or hard, loosen the
bolts and adjust the plate position up or
down on both sides.
Tightening torque (M8): 23.54 to 27.46 N⋅m
(2.40 to 2.80 kgf⋅m) (17.36 to 20.25 ft-lbs.)
(1) Latch
(2) Handgrip
(3) Plate
(4) Bolt
4. Push the safety support into the latch slot to lock
when the cargo is fully raised.
(1) Safety support
(2) Latch slot
5. To lower the cargo bed, raise the cargo bed slightly
using the handgrip.
6. Release the safety support from the latch slot by
pulling up on the middle of the support.
7. Put the safety support into the support holder.
RTV520
(A) "LOCK"
(B) "RELEASE"
(C) "RAISE"
(1) Support holder
8. Slowly lower the cargo bed onto the frame and set
the latches on both sides.
CARGO BED
43