Combine Jobs In A Docbox (Build Function) - Canon varioPrint 115 Operation Manual

Combine Jobs in a DocBox (Build Function)

Introduction
You can combine a job in a DocBox with other jobs from the same DocBox. The system creates a
new job from the selected jobs. The
NOTE
You cannot combine PDF jobs with non-PDF jobs.
Illustration
[39] The [Create build] window
Procedure
1.
On the control panel, touch [Jobs] -> [DocBox].
2.
Touch the DocBox that contains the jobs you want to combine.
3. Touch the jobs you want to combine, or use an option from the [Select] menu to select multiple
jobs at once.
4. Touch the [Build] button or select [Build] from the drop-down menu.
A [Create build] window appears that allows you to make some changes.
5.
If necessary, use the [Up] and [Down] buttons to change the job order.
6.
If necessary, change the generic job settings, such as [Number of sets].
7.
Touch [OK].
Canon varioPRINT DP line
icon indicates a built job.
Combine Jobs in a DocBox (Build Function)
Chapter 8 - Plan the jobs 143