Canon varioPrint 115 Operation Manual page 140

Setting
[Trimming]
[Punching]
This option is only available when you have a punching unit connected.
Setting
[Punching]
Canon varioPRINT DP line
Values
[None]
[Trim size]
[Finishing size]
Values
[None]
[2 holes]
[3 holes]
[4 holes]
[Die set dependent]
Overview of the Available Settings for DocBox Jobs
Description
No trimming of the document.
You can indicate the amount of trimming at
the long edge and short edge (from 2.0 mm to
20.0 mm / 0.08" - 0.80")
You can indicate the size of the resulting docu-
ment after trimming. You can either touch
[Size] to select a default media size or manual-
ly define the width and length of the docu-
ment. When you define a non-standard media
size, the [Size] box displays [Custom].
Description
Here you can select the required number and
the location of the punch holes.
Location:
• [Left]
• [Top]
• [Right]
• [Bottom]
Chapter 8 - Plan the jobs 139