Canon varioPrint 115 Operation Manual page 309

Process Wax Paper and Use of the [Wax mode] Setting
Illustration
[64] The [Wax mode] setting
IMPORTANT
Make sure that you put the [Wax mode] setting back to [Off] when you have finished using wax
paper.
Procedure
1. On the control panel, touch [System] -> [Setup] -> [Advanced media settings] (under [Advanced]).
2.
Touch the [Wax mode] button.
3.
Touch [1] or [2].
4.
Touch [OK].
The text on the [Advanced media settings] button has changed into [Custom]. This indicates that
a default setting in the [Advanced media settings] section has changed.. The control panel does
not display any other reminder that helps you to remember that the [Wax mode] setting is active.
308 Chapter 13 - Media Handling
Canon varioPRINT DP line