Canon varioPrint 115 Operation Manual page 333

Shifted Image
Ranges
Setting
X elongation (0.01%)
NOTE
If the elongation is too great, the image can become larger than the sheet. In this case the image
is printed over the edges of the sheet.
• Risk of reprinting.
• Risk of system pollution.
Shifted Image
When to do
The image is shifted in the X direction (feed direction) and/or in the Z direction (perpendicular to
the feed direction).
Procedure
Job
<--
Media Registration
With an image shift, all corners are shifted in the same direction. We assume that the skew is
correct.
Procedure
1. On the verification chart, determine if the image on the back side is shifted or the image on the
front side.
Change the back side if the image on the back side is shifted.
332 Chapter 13 - Media Handling
Range
-500 to +500
Verification chart
Feed direction
Canon varioPRINT DP line