Canon varioPrint 115 Operation Manual page 50

[16] Job name truncation
1. Touch [System] -> [Setup] -> [Job name truncation].
2. Indicate how you want to shorten the job name.
3. Touch [OK].
Adjust the readability of the control panel
You can adjust the brightness and contrast of the control panel screen. Use the automatic or
manual adjustment.
Setting
[Auto adjust]
[Brightness]
[Contrast]
Canon varioPRINT DP line
Description
The screen of the control panel will automatically set the correct
ratio of brightness and contrast.
You can increase or decrease the brightness from level 20 to 100
in steps of one. The higher the value, the higher the brightness.
You can increase or decrease the contrast from level 10 to 100 in
steps of one. The higher the value, the higher the contrast.
Adjust the control panel
Chapter 5 - Prepare the print system 49