Canon varioPrint 115 Operation Manual page 141

Overview of the Available Settings for DocBox Jobs
[Number of sets]
Setting
[Number of sets]
[Job name]
Setting
[Job name]
[Page range]
Setting
[Page range]
[Separator sheets]
Setting
[Separator sheets]
140 Chapter 8 - Plan the jobs
Values
[Check first set]
[Number of sets]
Values
Values
[All]
[Page range]
Values
[On]
[Off]
Description
When the [Check first set] setting is enabled,
the printer stops after the first set of a job has
been printed. You can check the quality of the
output.
NOTE
This setting is only available when in
the workflow profile [Check first set]
is set to [As in job].
You can indicate how many copies of the job
you need. You can enter a value from 1 -
65,000. The default value is 1.
Description
To identify your job more easily, you can change
the name of the job. When you touch the [Job
name] button a keyboard appears. Then you can
change the name of the job.
Description
When [All] is selected, all pages of the job will
be printed.
When [Page range] is selected, use the [From]
and [To] fields to indicate the first and last pa-
ges you want printed.
Description
When the [Separator sheets] setting is ena-
bled, a separate sheet is inserted automatically
before each set of a job to create a clear dis-
tinction between two sets. Separator sheets
are always empty. In the Settings Editor, select
a media from the media catalog use as separa-
tor sheets. You can also indicate the feed di-
rection of the separator sheets (long-edge feed
or short-edge feed).
No separator sheet will be inserted before
each set.
Canon varioPRINT DP line