Canon varioPrint 115 Operation Manual page 61

Introduction to Automated Workflows
Attribute
[Header up/down]
[Offset stacking]
[Offset after N sets]
[Punches]
[Folding]
[Fold to]
[Trim]
[Trim / target width ({0})]
[Trim / target height ({0})]
[Contrast]
[Brightness adjustment]
[Resolution]
[Halftoning]
[Fattening]
[Minimum line width]
[Enhanced color rendering] You can indicate whether the [Enhanced color rendering] must be
[Page numbers]
[Start with page number]
[Position]
[Text before page number]
[Text after page number]
[Job destination]
[DocBox name]
[Printing workflow]
[PDL type]
60 Chapter 5 - Prepare the print system
Description
You can indicate whether the header of the sheets must be [Head-
er-up] or [Header-down].
You can indicate whether the prints must be delivered to the out-
put location with or without a small shift.
You can indicate the number of sets that will be shifted together.
You can indicate how many punch holes are required.
You can indicate the required folding method.
You can indicate the size in which the media must be folded.
You can indicate how the media must be trimmed.
You can indicate the width that must be trimmed.
You can indicate the height that must be trimmed.
You can indicate the contrast of the print.
You can indicate whether the print must be darker or lighter.
You can indicate whether the job must be printed on [1200 x 1200
dpi] or [600 x 2400 dpi].
You can indicate whether the job must be printed [Line 200 LPI],
[Dot 200 LPI] or [Dot 125 LPI].
You can indicate whether [Fattening] must be on or off.
You can indicate whether the minimum line width must be main-
tained, or thinner lines can be printed.
on or off.
You can indicate whether or not you want to print a page number
on each page of a PDF print job.
You can indicate with which number the page numbering starts.
You can indicate the position of the page number on the page.
You can indicate the text that is printed before the page number.
You can indicate the text that is printed after the page number.
You can indicate the list to which the job must be sent. For the
varioPRINT DP line, you can select [Waiting jobs], [Scheduled
jobs] or [DocBox jobs] (optional).
You can indicate the name of the DocBox to which the jobs must
be sent.
You can indicate the type of workflow for the jobs. You can select
[Receive, then print while RIP is in progress] or [Streaming].
You can indicate whether PostScript®, PCL, PDF or XPS must be
used as page description language.
4
Canon varioPRINT DP line