Canon varioPrint 115 Operation Manual page 136

[Print quality]
Setting
[Print quality] 1
Canon varioPRINT DP line
Values
[Brightness] (default
0)
[Contrast] (default 0)
[Advanced settings]
[Fattening] (default
[Off])
[Minimum line width]
(default [On])
Overview of the Available Settings for DocBox Jobs
Description
When your prints are too dark or too light,
changing the brightness can correct this prob-
lem.
-1 to -3 creates darker prints.
+1 to +3 creates lighter prints.
When the difference between light and dark
areas of a print is not big enough, you can
change the contrast to correct this problem.
Example: When a blue text is displayed ras-
tered, you can increase the contrast to make
the text more black and sharper.
The advanced settings are intended for special
print jobs, such as printing bar codes or print-
ing a color image on a B/W printer.
The fattening function can increase the reada-
bility of texts with small fonts (< 6 points, 6/72
inch).
However, when you print special data such as
bar codes, fattening can make bar codes diffi-
cult to read. Therefore, you can turn the fatten-
ing function off when you print such special
data.
The minimum line width function is required
to keep thin lines visible. The lines in PS/PDF
jobs always keep a minimum width of 1/600
inch.
However, when you print special data such as
CAD drawings, smaller lines may be required.
Therefore, you can turn the minimum line
width function off. Then even thinner lines will
be printed.
Chapter 8 - Plan the jobs
4
135