Canon varioPrint 115 Operation Manual page 106

Copy books on the glass plate
Step Action
1 Open the ADF.
2 Place the book on the glass plate with the
pages face down.
3 Align the top edge of pages of your book
with the back edge of the glass plate (by
the arrow in the top left corner).
4 Gently close the ADF to prevent personal
injury, damage to the scanner, or damage
to the book.
5 Define the copy or scan settings on the
control panel and touch [Start] .
6 When the copy or scan job is ready, open
the ADF and remove the book from the
glass plate.
Canon varioPRINT DP line
NOTE
Open the ADF at least 300 mm
(11.8"). Otherwise, the size of
the originals may not be detec-
ted correctly.
Copy or scan originals and books using the glass plate
Illustration
Sensor
Sensor = Sensor
Select the setting [Book] to make copies/
scans from a book original on the glass
platen. You can copy/scan the individual
pages of a book.
You can copy/scan the left-hand half and
the right-hand half of the original (opened
book) as two separate copies. Or you can
copy/scan the left-hand half or the right-
hand half of the original (opened book).
Chapter 6 - Prepare the jobs
4
105