Canon varioPrint 115 Operation Manual page 193

Stop the Printer
When to stop
After a job
NOTE
When you print streaming jobs
button two times to stop the printer as soon as possible.
Procedure
Automatic stop
When
• The [Check first set] setting in a [Workflow
profile] is [On], and
• The [Check first set] setting is also enabled
in the job.
The [Confirm start of job] setting in a [Work-
flow profile] is [On].
192 Chapter 9 - Carry Out Print Jobs
Action Description
Touch the [Stop • In [Jobs] -> [Queues] -> [Scheduled jobs] you must se-
after job] button
• A horizontal, red and white stop bar indicates that the
• The printer stops when the last job before the stop bar
• Touch the [Resume] button
or jobs that consist of 1 large set, you must press the Stop
lect the job after which the printer must stop. Then
touch the [Stop after job] button.
stop-after-job function is active.
is completed.
NOTE
The [Stop after job] button is not available
when the [Confirm start of job] setting in the
active [Workflow profile] is set to [On]. Then
the printer stops automatically after each job.
Then
The printer stops each time the first set of a
print job is completed. You can check the first
set before you continue the print job.
The printer stops each time at the start of a
new job. You must start each job manually.
to continue printing.
Canon varioPRINT DP line