Replace The Heat Exchanger Foils - Canon varioPrint 115 Operation Manual

Replace the Heat Exchanger Foils

Before you begin
NOTE
This POC action is available, depending on the type of the heat exchanger foils.
1. On the control panel, touch [System] -> [Maintenance] -> [Go to maintenance tasks] ->
[Replace the heat exchanger foils] -> [Start].
2. [Enter the maintenance PIN.]
3. [Touch Next to unlock the door.]
Required tools
Socket wrench
New heat exchanger foils
CAUTION
Only trained personnel is allowed to carry out POC actions.
Illustration
[78] Required tools
Procedure
Replace the heat exchanger foils
Step Action
1 [Open the front door.]
Canon varioPRINT DP line
Replace the Heat Exchanger Foils
Illustration
Chapter 14 - Maintain the print system
4
381