System Power Led; System Status Led - Broadcom Brocade G720 Hardware Installation Manual

G720-Install-IG101 Installation Guide
Figure 27: Brocade G720 Switch Port-Side LEDs - Right Side
1. SFP+ Upper Port 48
2. SFP+ Upper Port 50
3. SFP+ Lower Port 52
4. SFP+ Lower Port 54
5. SFP+ Upper Port 56
6. SFP+ Upper Port 58
7. SFP+ Lower Port 60
8. SFP+ Lower Port 62

System Power LED

Use the following table to interpret the system power LED.
Table 9: System Power LED Patterns during Normal Operation
LED Color
No light
Steady green

System Status LED

Use the following table to interpret the system status LED.
Broadcom
Status of Hardware
The system is off, or there is an internal
power supply failure.
The system is on, and power supplies are
functioning properly.
®
Brocade G720 Switch Hardware Installation Guide
Recommended Action
Verify that the system is powered on, that
the power cables are attached, and that
your power source is live.
If the system power LED is not green, the
unit may be faulty.
Contact your solution provider.
No action is required.
G720-Install-IG101
59